Toggle-able interact type settings

• Adds the ability to switch the action a user uses to trigger output
• Valid options are 'attack', 'both', and 'interact'
• Crouching is still required while doing the interaction
• Adds toggle command: /vi toggle interact-type [attack|interact|both]
• Adds permission villagerinfo.commands.toggle.interact-type - default is true

Tested on 1.21.5

Functionality Changes:

• Villager's beds are now highlighted

Locale Changes:

• New lines are no longer hard-coded into the component builder. This means that you will either need to regenerate your locale, or add \n to the beginning of the villager-information-message messages.

Config Changes:

• Added highlight-bed-on-output, bed-highlight-color, and defaults section.
  • highlight-bed-on-output highlights bed at the same time as workstation
  • bed-highlight-color - color to highlight the beds in RR GG BB format
  • defaults - default settings for the highlighted blocks

• Fixes the mappings so that paper will not remap it.
• No other changes

• Updated to 1.20.6
• No longer supports 1.19-1.20.4

• Updated NMS to support 1.20.4 (it worked but was giving an error about not being supported)
• no other changes

Support for 1.20.2

Loads on 1.19-1.19.4 again

Updated to 1.20 (No functionality changes)

• Fixes an issue where the highlight toggle did not actually toggle highlighting
• Adds slight backwards compatibility (to 1.19)
  • Versions before 1.19.4 will not be able to use colors for their displays, as the colors are made possible by Block Display Entities - a feature introduced in Minecraft 1.19.4
  • These versions will be using the old way of highlighting the work stations - falling blocks
  • If you are using this plugin on an earlier version, all displays will glow white, and may have a visual glitch of falling through the ground occasionally.
  • Additionally if you are on a later version than the 'latest' that the plugin is on, it will manually calculate the player's reputation instead of taking directly from the game (NMS hook) - I believe my calculations are done correctly but it might be slightly off from what the actual numbers are, so just be aware of that
  • Other differences should not show on a user end, there are a number more API methods for the pre-1.19.4 methods

Full Changelog: https://github.com/Simplexity-Development/VillagerInfo/compare/v3.0.0-release...v3.0.1

What's changed since VillagerInfo v2.7

<repository>
  <id>modrinth-repo</id>
  <url>https://api.modrinth.com/maven/</url>
</repository>

<dependency>
  <groupId>maven.modrinth</groupId>
  <artifactId>villager-info</artifactId>
  <version>3.0.0</version>
  <scope>provided</scope>
</dependency>

exclusiveContent {
    forRepository { maven { url = "https://api.modrinth.com/maven" } }
    filter { includeGroup "maven.modrinth" }
}

dependencies {
    compileOnly 'maven.modrinth:villager-info:3.0.0'
}

The plugin has been completely re-written and now should be able to be added onto by other plugins or addons.

What's Changed

• Lots of code refactoring
• Rename package from adhdmc to simplexity
• Start adding javadocs

Full Changelog: https://github.com/Simplexity-Development/VillagerInfo-Rewrite/compare/v3.0.0-beta-4...v3.0.0-beta-5

What's changed

• Command logic has been changed for the final time. They are now arranged in subcommands. /villagerinfo toggle highlight for example.
• Permissions have remained the same
• Commands should not autofill if the player does not have the permission
• /villagerinfo help command should not show commands the player does not have access to
• All the javadocs have been cleared from the code currently - in the process of trying to make the code easier to understand
• Re-added the ability to use either the reputation bar or the reputation number (uses the REPUTATION_TOTAL_FORMAT locale message) from @Aplini in https://github.com/Simplexity-Development/VillagerInfo/pull/25

Full Changelog: https://github.com/Simplexity-Development/VillagerInfo-Rewrite/compare/v3.0.0-beta-3...v3.0.0-beta-4

What's Changed:

This is a beta version, if you come across issues please report them!
⚠️ Locale, config, commands, and permissions are liable to change dramatically until the plugin is out of beta ⚠️

• /villinfo command has been changed to /vill-toggle - This is likely to change again
• There is now the ability to toggle output, highlight, and sound - these are personal toggles
• The plugin now uses the configured sound, pitch, and volume from the config
• All permissions that were previously vill.info. are now villagerinfo. and command permissions have been changed to commands so vill.info.command.toggle.output is now villagerinfo.commands.toggle.output
• More locale messages

Full Changelog: https://github.com/ADHDMC/VillagerInfo-Rewrite/compare/v3.0.0-beta-2...v3.0.0-beta-3

What's Changed:

• Adds an info toggle event
• Adds an output-toggle command
• Removes the additional arguments from the reload command (decided it was unnecessary, reloading doesn't happen enough to warrant it)
• Adds SubCommand handling

Plugin should now be about back to where the previous plugin was at, now adding new options - locale and config are not final

Full Changelog: https://github.com/ADHDMC/VillagerInfo-Rewrite/compare/v3.0.0-beta-1...v3.0.0-beta-2

Please note, this rewrite is in beta, the config values are subject to change until the rewrite is taken out of beta.

What's changed

• Plugin has been re-written from the ground up
• Now calling events when checking info on villagers and zombie villagers, as well as spawning and removing the highlights - this allows for other plugins to cancel these events far easier, or hook into them as needed.
• Using BlockDisplays instead of FallingBlocks for highlighting workstations
  • This allows for RGB color options on the glow color
  • The color can be defined individually per block type
  • Fixes an issue where the falling blocks would slide down even though they weren't supposed to
• locale messages are divided into 3 categories:
  • villager-information-messages - The messages you will see when you get the information from a villager
  • insertion-messages - Messages that are inserted into other messages
  • server-messages - Errors and server feedback
• Config options have been renamed to (hopefully) be more understandable
• Adds translation key support for the Profession field and the items in a Villager's inventory (Adopted from the PR to the original plugin
• Reload command now has an option to reload the config or locale seperately

Current Permissions:

• vill.info:
  default: true
  description: Allows the player to see the information from a villager using crouch-right-click
• vill.reload.*:
  description: Allows the Player to use /villreload to reload all the VillagerInfo configurations
• vill.reload.locale:
  default: op
  description: Allows the Player to reload VillagerInfo's locale
• vill.reload.config:
  default: op
  description: Allows the Player to reload VillagerInfo's config

Toggle command has not yet been re-implemented

What's Changed

• Use client's locale for villager profession output by @ApliNi in PR 25
• Use client's locale for villager inventory output by @ApliNi in PR 25
• Allow PLAYER_REPUTATION to be set as bar or number by using <reputation> or <reputation_number> in the locale by @ApliNi in PR 25

New Contributors

• @ApliNi made their first contribution in PR 25

Full Changelog: https://github.com/ADHDMC/VillagerInfo/compare/2.6...2.7

Cleaned up code a bit, tested on 1.19.4, I am rewriting the plugin in Gradle so that I can use paperweight to work on a couple requested features

⚠️ THE LOCALE KEYS HAVE CHANGED ⚠️

You will either need to regenerate the locale or fix the keys to match the ones here

Please note: This will be the last update that will not require being on the latest minecraft release

Full Changelog: https://github.com/ADHDMC/VillagerInfo/compare/2.5...2.5.1

Fixes incorrect messages, saying 'Shift-right-click' instead of 'Crouch-right-click', closes issue #23

(Note you may need to update the lang file manually for the help message, or delete it and let it regenerate on /vill reload)

Larger update coming soon

What's Changed

• Message handling by @RhythmicSys in https://github.com/ADHDMC/VillagerInfo/pull/21
• Information is now shown in a hover by default, instead of all being printed to the chat
• Health readout
• Purpur lobtomized readout (purpur-specific feature)

If you preferred the old layout, I've attached a lang file to the GitHub Release that can be swapped out with the current one to put it back to how it was

Full Changelog: https://github.com/ADHDMC/VillagerInfo/compare/2.4...2.5